Bidet- International.com Travel Bidet Bidet- International.com Your Widest Bidet Online Store
   

Bidet-International.com
3155 E. Patrick Lane, Suite #9
Las Vegas, NV 89123
Call Us Toll Free • Open 24 hrs 7 days
(877) 852-2823
(702) 951-7256

 
 
Bidet- International.com Travel Bidet
Home
About Us
Bidet History
Order Info
Warranty
Contact
Help Center
Benefits
Installation
Toilet Measurements
Testimonials
F. A .Q
Shipping Information
Privacy Policy
Bidet- International.com Your Widest Bidet Online Store
Bidet-International.com Free Brochure
Bidet-International.com 100% Satisfaction Guarantee
 

Bidet- International.com Your Widest Bidet Online Store

-

Bio Bidet BB-300H
• Our model with user-controlled warm water feature.
• Temperature control knob.
• Bathroom sink hot-water pipe serves as water source.
• Pressure control allows you to adjust water as desired.
• Hot water temperature is controllable, and can be adjusted easily.
• Nozzle self-cleaning feature cleans out the residual water before use.
• No electricity or battery needed.
MODEL
COLOR
DISCOUNT
OPTION
BIO BIDET
BB300H Series
white
$225.00
ALL ITEMS / * (Free Shipping)

 What you have
 

(2) Flexible Hose

Adapter

Conversion Nut

Packing

 What you need

Teflon Tape

Screw Driver

Wrench

 Preparation
1. Remove the existing toilet seat. To access screw, push lid upward located all the way at the end of seat with sharp object. Take out seat by loosening screw and holding bolt from bottom.

2. Turn off the main water valve.

3. Take out exiting water pipe. Loosen fill valve just below the water tank and compression nut from control valve. Then take out water pipe by tapping fill valve.

4. Flush down all the remaining water in water tank.

Installation

1. Be sure to shut off main valve.

2. Use the supplied hose to connect the body joint of the main unit to the
branching valve. tighten the coupling nuts at the body joint and the
branch outlet.

3. Be sure not to over tighten flexible hose at flush tank end.
Use only hand pressure.

4. Using Teflon tape is recommended.

5. Shield the nozzle with your hand to protect the water from spraying too 
far during the trial operation.

6. Press the CLEANSING button to test the water stream.

Cleaning the Strainer

The unit will not operate properly if the strainer is clogged.
Be sure to clean the strainer.

1. Close the shutoff valve.

2. Flush the toilet to empty the flush tank.

3. Unscrew the nut.

4. Clean the strainer using a small brush.

5. Re-screw the nut.

6. Open the shutoff valve. 

Built-In water Heater Bidet
CLEANSING
Warm water cleanses the rear area thoroughly and refreshingly.
60 SECOND AUTOMATIC SHUT-OFF!		 WATER PRESSURE ADJUSTMENT
Water pressure is adjustable to 4 levels,
as desired.
TEMPERATURE ADJUSTMENT
Water temperature is adjustable to 4 levels.
This model has an electric built-in water heater.		 BUILT-IN WATER PUMP
A built-in water pump maintains an even water pressure regardless of source water pressure.
SPACE CONSERVING
Its compact and simple design conserves space.
IT MAY BE INSTALLED ON EITHER SIDE, BASED ON AVAILABLE SPACE OR USER PREFERENCE.		 Quality approved by UL
SB-100, Our European model obtained GS Mark.
It is Practical, Convenient, and Clean!