|
|
MORE
INFO 
|
|
|
|
|
| |
|
|
Bio
Bidet
BB-200
• Our model with user-controlled warm water
feature.
• Temperature control knob.
• Bathroom sink hot-water pipe serves as water
source.
• Pressure control allows you to adjust water as
desired.
• Hot water temperature is controllable, and can
be adjusted easily.
• Nozzle self-cleaning feature cleans out the
residual water before use.
• No electricity or battery needed.
|
|
|
MODEL
|
COLOR
|
DISCOUNT
|
OPTION
|
|
BIO
BIDET
BB200
Series
|
white
|
$129.95
|
|
|
ALL
ITEMS / * (Free Shipping)
|
|
| |
| What
you have |
|
|
|
|
|
|
Flexible Hoses
7/8"x3/8"
1/2"x3/8"
|
(2) Adapters with
emergency shut valve
|
10' White tube
|
(3) Rubber seal
|
(2) 1/2" Converter
|
|
| What
you need |
|
|
|
|
|
|
|
Teflon Tape
|
Screw Driver
|
Wrench
|
Cutter
|
Compression Fitting
|
Velcro Tape
(optional)
|
|
|
| First
things first. |
Locate hot water source and make sure supplied
10 feet of white tube is enough to connect both hot and cold
water to BB-200.
Should you need extra length of tube, contact customer
service or distributor in you area for immediate supply. Compression
fitting is not standard supply. Be sure to have it before
cutting pipe. |
|
| Installation |
|
|
|
1. Shut off the water valve.
2. Measure and cut copper
pipe using cutter.
3. Unscrew and detach bolt.
4. Apply bolt first, then
slide compression fitting.
5. Slide down and fit it
to top thread of adapter.
(copper pipe must be straight to
thread)
6. Insert packing into bottom
of adapter as illustrated,
then tighten adapter to main water
valve.
Avoid having tube inlet addressed
directly to top of water valve to turn it back on freely.
You can now close emergency shut off
valve and turn on main water valve to
test if there is any leak.
|
|
|
Insert one end of
the white tube into adapter inlet with nut as shown,
the
insert the other end to BB-200 hot
water inlet.
Use Velcro tape to secure white tube
to edge of wall.
This will prevent accidental unplugging tube and tube
from hanging.
|
|
|
If you have
a flexible metal hoes instead of copper pipe,
simply substitute it with supplied
flexible hose with packing inserted.
For cold water connection, please
refer to BB-50 installation page.
|
|
| Ready? Go! |
|
|
Trying your Bio-Bidet
for the first time.
Congratulations! Your are ready to use the Bio-Bidet for
the first time.
IT IS VERY IMPORTANT THAT YOU USE "NOZZLE
CLEANING" EVERY TIME YOU
USE BB-200. IT WILL:
1. PREVENT ACCIDENTAL NOZZLE CLOGGING.
2. PREVENT TOILET CLOGGING.
3. IT WILL BRING UP ENOUGH HOT WATER TO PROVIDE
YOU WARM
WATER WHEN YOU ARE
READY TO CLEAN YOURSELF.
To use it, simply pull it up all the way residual cold
water is drained and
warm water starts to run through.
 You must push it down before adjusting
water pressure.
|
|
Using 1/2" Converter
|
|
|
If your main water line
has 1/2" male thread instead of 3/8", simply convert
it to 3/8"
using supplied converter.
Simply insert converter
in between main water line hose as illustrated.
have further questions
or need assistance?
Contact any of our distributors in you area or a representative
at our main office.
We are there to help
with your questions.
|
|
|
| Trouble Shooting |
|
|
|
|
|
If your spray nozzle
is clogged, you can remove the spray outlet by turning
it 90 degree
counter clockwise and pulling it down. After cleaning
it, put it back an turn 90 degree
clockwise to lock.
You can select two different water spray angles by pulling
the spray outlet tip up
or pushing it back as illustrated. |
|
FINAL ASSEMBLED FIGURE.
|
(877) 852-2823
